ATC iPrint Card Reader

Overview

ATC iPrint Card Reader is an all-in-one device specifically designed for the Micro Focus iPrint Appliance to release print jobs generated by walkup printing. Users print to iPrint Appliance and then walkup to the printer and present their staff badge to this iPrint card reader nearby the printer to release the print jobs accordingly. For more secure requirement, you can enter a PIN code after swift your staff badge. End user can register their Card Serial Number by themselves.

Keypad only model

 •Built-in 3x4 keypad to enter PIN code

 •Including 0~9 Numeric key, Cancel key and Confirm key

 •For PIN only authentication to release print jobs of Micro Focus iPrint Appliance

 

Keypad + Mifare Reader model

Keypad feature

 •Built-in 3x4 keypad to enter PIN code

 •Including 0~9 Numeric key, Cancel key and Confirm key

Mifare Reader feature

 •Including highly integrated reader for contactless communication at 13.56 MHz.

 •The internal reader supports ISO/IEC 14443 A/MIFARE and NTAG.

 •Support all variants of the MIFARE Mini, MIFARE 1K, MIFARE 4K, MIFARE Ultralight, MIFARE DESFire EV1 and MIFARE Plus RF identification protocol

 •It supports Mifare card only authentication, Mifare card or PIN code instead of card, Mifare card plus PIN code authentication to release print jobs of Micro Focus iPrint Appliance

 

Keypad + Proximity Reader model

Keypad feature

 •Built-in 3x4 keypad to enter PIN code

 •Including 0~9 Numeric key, Cancel key and Confirm key

Proximity Reader feature

 •It can read 125KHz EM4100 series Proximity card.

 •It supports Proximity card only authentication, Proximity card or PIN code instead of card, Proximity card plus PIN code authentication to release print jobs of Micro Focus iPrint Appliance

 

System requirement:

iPrint Appliance 3.0 or above

Micro Focus eDirectory or Microsoft Active Directory

 

Hardware specification:

SoC: Broadcom BCM2837

CPU: 4× ARM Cortex-A53, 1.2GHz

RAM: 1GB

Networking: 10/100 Ethernet, 2.4GHz 802.11n wireless

Storage: 16GB microSD

USB Ports: Two USB 2.0 for second Ethernet port or external card reader

Power: Micro USB power source 2.5 Amps

Options: USB Ethernet dongle for bridge printing

 

MIFARE is a trademark of NXP B.V.

Micro Focus is a trademark of Micro Focus (IP) Limited

 

Micro Focus iPrint - WalkUp Print Release using ATC iPrint Reader - Using just a PIN/Passcode to release print job
    https://youtu.be/fF2syI8WQC8

iPrint WalkUp Print Release using a Mifare card
    https://youtu.be/491ASJfCMhM